Animal Fat Oil Extraction Machinery
Animal oil extraction plant refers to the processing of raw materials such as chicken racks, duck racks, pork, bones, beef tallow, pig meat, sheep fat etc into animal fat oil, which can be used as cooking oil or feed oil, and residues can be used to mak
Animal oil extraction plant refers to the processing of raw materials such as chicken racks, duck racks, pork, bones, beef tallow, pig meat, sheep fat. etc. into animal fat oil, which can be used as cooking oil or feed oil, and residues can be used to make animal feed.
Animal oil production line, especially for animal fat and oil, after Drying, degreasing, grinding and other procedures the animal meat will be completely broken down into fat and bone meal. Oil can be made into industrial oils, feeding oils, biodiesel, etc. The meat and bone meal can be used to make high protein feed and organic fertilizer, both of which have high market potential.
Animal Oil Processing Plant Process Description (Negative Pressure Fat Oil Smelting Solution)
1. Animal Fat Unpack and crush the work section:
The raw materials are unpacked on the unpacking platform and conveyed by the conveyor to the crusher for comminution. The crushed particles are in the range of φ5mm-8mm, and the crushed pieces are even. Excessive or too small raw materials may cause raw slag or burnt paste. Oil machine performance
2, pre-dissolved balanced transport section:
After crushing, the raw materials are immersed in a preheated balance pot, heated and heated by preheating, stirring, and freezing to achieve a solid-liquid mixing state suitable for vacuum transportation, so as to achieve the process requirements of pipeline transportation; on the other hand, the preheating pot plays a whole role. The material balance of the production line.
3, negative pressure smelting section:
The preheated pan is preheated to a solid-liquid mixed state and the raw material is vacuum-transferred to the smelting pot for heating and melting the cake. At the same time, the stirring device is turned on to make the material heated evenly without sticking the pan. This process adopts a vacuum simmering pan, which has a large heated area and is uniformly mixed. The automatic cleaning device effectively controls the raw material or burnt phenomenon. Since the raw material itself has a large moisture content, vacuum dehydration starts after the smelting temperature reaches 85 degrees Celsius, and the vacuum degree decreases as the vapor volatilization increases, and smelting is maintained during the dehydration process. Vacuum degree in the pot. In the vacuum state, the animal oil raw material entering the negative pressure reactor can quickly separate the oil, water and slag.
4, vacuum dehydration and deodorization section:
A water jet vacuum jet pump is used to generate a negative pressure in the smelting pot. The vacuum line is equipped with a condenser, and the water molecules and odor micromolecule volatiles in the raw material are rapidly separated from the raw oil and fat in a vacuum state and flow into the tube with the vacuum flow. In the condenser, the split water molecules and odor molecules are forced to condense into distilled water collected in the liquid separation tank under the cold water circulation. Exhaust gas is activated carbon to absorb infrared electrolysis to produce oxygen emissions.
Air Infrared UV Ozone Treatment System
Photo-catalytic exhaust gas treatment equipment mainly uses special high-energy and high-ultraviolet UV ultraviolet light beams to irradiate the exhaust gas and crack industrial exhaust gases such as ammonia, trimethylamine, hydrogen sulfide, methyl thiol, methyl mercaptan, dimethyl sulfide, butyl acetate, and ethyl acetate. The molecular chain structure of esters, dimethyl disulfide, carbon disulfide and styrene, sulfides H2S, VOCs, benzene, toluene, xylene, making organic or inorganic high Molecules of molecular odor compounds are degraded and converted into low-molecular compounds such as CO2 and H2O under the irradiation of high-energy ultraviolet light beams. The use of high-energy, high-ozone UV UV light beams to decompose oxygen molecules and water molecules in the air to produce free oxygen (active oxygen) and OH radicals. Oxygen molecules must be combined with free oxygen and the negative and negative electrons that are carried to form ozone.
In addition, through the addition of special catalysts: according to different exhaust gas components configured more than 27 kinds of corresponding inert catalysts, catalysts using honeycomb metal mesh as a carrier, all-round contact with the light source, inert catalyst below 338 nm light source catalytic reaction, zoom 10 - 30 times the light source effect, making it fully react with the exhaust gas, shorten the contact time between the exhaust gas and the light source, thereby improving the exhaust gas purification efficiency.
5, oil residue separation section:
The process adopts screen plate oil residue separation scraper to increase the time of separating and drying the oil residue, effectively separating the oil residue skin oil, facilitating the pressing of the oil press, and the automatic cleaning device solves the jam of the sieve plate, the deterioration of the oil, and separation. The oil dregs are pressed for oil extraction.
Economic and technical indicators
1, crushed particles: φ5mm-8mm
2, melting temperature: 100 °C -140 °C
3, filtration pressure: <4 kg
4, melting time: 120-180min
5, melting vacuum degree: -0.04 ~ -0.08Mpa
6, product oil and water miscellaneous: ≤ 0.2%.
The Residues Cakes Animal Fat after Oil Extraction and Oil Extruder Press
We supply chicken fat oil processing machine, mutton fat oil extracting machine, cow fat oil making machine, beef tallow oil extraction plant, port fat oil processing machine, lard oil making plant, fish oil processing machine, duck fat oil extracting equipment, animal bones oil press machine, sheep fat oil extracting machinery, horse meat oil expeller machine.