Soybean / Kernel Double Teeth Roll Crusher
Section Introduction:
YPSG series tooth roller crusher is mainly used for crushing soybean, peanut kernel, castor and other granular materials to prepare excellent green embryos and improve oil yield It is now also widely used for shelling cottonseeds
Soybean / Kernel Double Teeth Roll Crusher
YPSG series tooth roller crusher is mainly used for crushing soybean, peanut kernel, castor, Cottonseeds Shelling and other granular materials to prepare excellent green embryos and improve oil yield. It is now also widely used for shelling cottonseeds. The machine has the characteristics of low noise, high output, uniform crushing granularity, low power consumption, small footprint, simple structure, flexible and reliable, and convenient maintenance.
YPSG Oilseeds Kernel Crusher Parameters:
Soybean Crusher Features:
☆ Fully enclosed structure is adopted. The shell, front and back (upper and lower) door panels and protective cover are made of high-quality carbon steel plates, with heat dissipation nets on the front and rear and both sides;
YPSG series tooth roller crusher is mainly used for crushing soybean, peanut kernel, castor, Cottonseeds Shelling and other granular materials to prepare excellent green embryos and improve oil yield. It is now also widely used for shelling cottonseeds. The machine has the characteristics of low noise, high output, uniform crushing granularity, low power consumption, small footprint, simple structure, flexible and reliable, and convenient maintenance.
YPSG Oilseeds Kernel Crusher Parameters:
|
Model |
Capacity t/d |
Motor Power kw |
Crushing Size (pcs) |
Note |
|
YPSG25×80 |
130-150 |
7.5×2+0.37 |
4-8 |
Soybean |
|
100-120 |
22+11+0.37 |
|
Cottonseeds Sheller |
|
|
YPSG25×100 |
150-200 |
11×2+0.37 |
4-8 |
Soybean |
|
120-150 |
30+11+0.37 |
|
Cottonseeds Sheller |
|
|
YPSG40×100 |
300-350 |
15×2+0.37 |
4-8 |
Soybean |
|
200-250 |
37+18.5+0.37 |
|
Cottonseeds Sheller |
|
|
YPSG40×125 |
350-400 |
18.5×2+0.55 |
4-8 |
Soybean |
|
250-300 |
45+22+0.37 |
|
Cottonseeds Sheller |
|
|
YPSG40×150 |
400-450 |
22×2+0.55 |
4-8 |
Soybean |
|
300-350 |
55+30+0.55 |
|
Cottonseeds Sheller |
Soybean Crusher Features:
☆ Fully enclosed structure is adopted. The shell, front and back (upper and lower) door panels and protective cover are made of high-quality carbon steel plates, with heat dissipation nets on the front and rear and both sides;
☆ The frame of the support roller is made of cast steel. After aging treatment and finishing, it ensures sufficient strength and rigidity, thus ensuring the stability and reliability of the operation of the tooth roller, and ensuring the output and life.
☆ The crushing roller adopts the roller imported from Germany;
☆ The crushing roller bearing adopts domestic brand products, with low noise, stable operation and long service life.
☆ The belt pulley adopts the tension sleeve design, which is convenient for disassembly;
☆ Both the dynamic and fixed crushing rollers adopt standard independent bearing supports, which can be disassembled and maintained quickly, and the operation and maintenance are convenient;
☆ Feeding device: feed the material evenly and continuously between the tooth rollers for crushing.
☆ Material blocking and magnetic separation device: It adopts advanced four-bar linkage mechanism, which is very convenient to adjust the amount of material and clean the debris on the magnet;
☆ Distance adjustment device: The turbine worm digitally adjusts the roller distance so that the moving roller and the fixed roller can never touch each other;
☆ Lubrication system: the lubrication port of the gear roller bearing of the machine is outside the protective cover, and it is very convenient to use centralized lubrication;
☆ This machine uses two pairs of rollers to work, and the main drive is equipped with a Siemens motor;
☆ No power distribution control cabinet.
